MOTU micro express-USB, Руководство пользователя

Страница: 29 / 156

CHAPTER
27
5
Working with Presets
OVERVIEW
This chapter describes your MOTU Express
interface’s eight factory presets and explains how
to:
■
Select a factory preset or one of eight user presets
from the front panel
■
Create your own user presets
■
Work with presets in the Express Console
software
■
Select presets using patch changes from any
MIDI source (such as a keyboard controller or
sequencer)
Factory versus user presets . . . . . . . . . . . . . . . . . .27
Selecting a preset on an Express XT . . . . . . . . . .27
Selecting a preset on a micro express . . . . . . . . .27
Factory Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
User Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Working with presets in Express Console . . . . .30
FACTORY VERSUS USER PRESETS
Your Express interface provides eight factory
presets and eight more user presets. Factory presets
are “hard-wired” and cannot be permanently
changed. If a factory preset is the current preset,
changes you make to your Express interface’s
settings will not be remembered unless you save
them to one of its eight user presets.
The eight user presets can be configured any way
you wish, and they can be stored in the interface
hardware itself for later recall.
SELECTING A PRESET ON AN EXPRESS XT
To select a preset from the front panel:
1
If you have a MIDI Express XT, press the BANK
button as needed to choose either the factory
preset bank or user preset bank. The Factory Preset
or User Preset LED will become lit.
2
Repeatedly press the SELECT button until the
LED below the program you want lights up.
As you repeatedly press the button, the LED cycles
through the eight programs.
SELECTING A PRESET ON A MICRO EXPRESS
To select a preset from the front panel:
1
Repeatedly press the SELECT button until the
LED for the program you want lights up.
2
The SELECT button cycles through both the
factory and user presets, as indicated by the red
User LED and the green Factory LED.
FACTORY PRESETS
The eight factory presets provide you with
optimum cable routing, SMPTE, and other settings
for various common situations in which you will
use your Express interface. The eight factory preset
settings are listed on the front panel as shown
below:
!USB Interfaces Manual Book Page 27 Tuesday, October 10, 2000 12:43 PM