Motorola WT41N0, Руководство интегратора

Страница: 37 / 172

Accessories 2 - 9
4.
Connect the DC cable to the power input on the back of the cradle.
5.
Plug the AC line cord into the power supply.
6.
Plug the AC line cord into an AC outlet.
Figure 2-8
CRD4001-4000ER Four Slot Ethernet Cradle Setup
Daisy-chaining CRD4001-4000ER Cradles
To connect several cradles to an Ethernet network, up to four Ethernet cradles may be daisychained.
Daisy-chaining should not be attempted when the main Ethernet connection to the first cradle is 10 Mbps as
throughput issues will certainly result. The LEDs on the Primary Ethernet port function in the same way as the
LEDs on the front of the cradle.
To daisychain cradles:
1.
Lift or remove the label covering the Secondary Port on the back of the first cradle.
2.
Connect one end of the daisychain Ethernet cable (either straight or twisted cable can be used) to the
Secondary Port of the first cradle.
3.
Connect the other end of the Ethernet cable to the Primary Port of the second cradle.
4.
Connect additional cradles as described in steps 1 and 2.
Power Port
Primary Port
Ethernet Switch, Router or
Hub Connection
AC Line Cord
Ethernet Cable
DC Power Cable
Power Supply
Right LED Left LED