Motorola WT41N0, Руководство интегратора

Страница: 127 / 172

Maintenance & Troubleshooting 9 - 5
3.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
4.
Rub the cotton portion of the cotton tipped applicator back-and-forth across each connector. Do not leave
any cotton residue on the connector.
5.
Repeat at least three times.
6.
Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
7.
Use a dry cotton tipped applicator and repeat steps 4 through 7.
8.
Spray compressed air on the connector areas by pointing the tube/nozzle about ½ inch away from the
surface.
9.
Inspect the area for any grease or dirt, repeat if required.
10.
Replace connector rubber plugs, if required.
Cleaning the RS309, RS409, RS419 and RS507
Housing
Using the alcohol wipes, wipe the housing including keys and in-between keys.
Scanner Exit Window
Wipe the scanner exit window periodically with a lens cloth or other material suitable for cleaning optical
material such as eyeglasses.
Connectors
1.
Disconnect the scanner from mobile computer.
2.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
3.
Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector pins. Do not
leave any cotton residue on the connector.
4.
Repeat at least three times.
5.
Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
Use a dry cotton tipped applicator and repeat steps 3 through 5.
6.
Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the
surface.
7.
Inspect the area for any grease or dirt, repeat if required.
Cleaning Cradle Connectors
To clean the connectors on a cradle:
CAUTION
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
CAUTION
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.