manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Motorola WiNG 5 - это инновационное решение для беспроводных сетей. Устройство предоставляет доступ к System Reference Manual для детального понимания работы продукта. Пользователи могут скачать этот руководство бесплатно на manualshive.com. Узнайте больше о возможностях WiNG 5 и оптимизируйте свою беспроводную сеть.

Поделиться
Скачать
background image

Appendix B Publicly Available Software B - 21

IN NO EVENT SHALL THE WU-FTPD DEVELOPMENT GROUP, THE COPYRIGHT HOLDERS, OR CONTRIBUTORS, BE 
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. USE, MODIFICATION, OR REDISTRIBUTION, OF THIS SOFTWARE IMPLIES ACCEPTANCE OF ALL TERMS AND 

CONDITIONS OF THIS LICENSE.

B.3.6 Open SSL License

LICENSE ISSUES

 ==============

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of   the OpenSSL License and the original SSLeay 
license apply to the toolkit.   See below for the actual license texts. Actually both licenses are BSD-style Open Source 
licenses. In case of any license issues related to OpenSSL please contact 

[email protected]

.

OpenSSL License

====================================================================

Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following 

disclaimer. 

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following 

disclaimer in documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: 

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. 
(

http://www.openssl.org/)

"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from 

this software without prior written permission. For written permission, please contact     

[email protected]

.

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without 

prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software 

developed by the OpenSSL Project for use in the OpenSSL Toolkit (

http://www.openssl.org/)

"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (

[email protected]

). This product includes software 

written by Tim Hudson (

[email protected]

).

Original SSLeay License

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WiNG 5

ICP DAS USA WF-2000 Series Faq preview
WF-2000 Series
Бренд: ICP DAS USA Страницы: 8
Ublox ODIN-W2 Series System Integration Manual preview
ODIN-W2 Series
Бренд: Ublox Страницы: 43
X-Micro XWL-11GRTX User Manual preview
XWL-11GRTX
Бренд: X-Micro Страницы: 76
Watchguard AP330 Quick Start Manual preview
AP330
Бренд: Watchguard Страницы: 2
SIYI MK15E User Manual preview
MK15E
Бренд: SIYI Страницы: 95
7links PE-8074 User Manual preview
PE-8074
Бренд: 7links Страницы: 170
Link-One L1-RW332 User Manual preview
L1-RW332
Бренд: Link-One Страницы: 77
Ruijie Networks RG-AP130-W Quick Installation Manual preview
RG-AP130-W
Бренд: Ruijie Networks Страницы: 12
NETGEAR WNDR4500v2 Installation Manual preview
WNDR4500v2
Бренд: NETGEAR Страницы: 22
H3C Magic NX15 Compliance And Safety Manual preview
Magic NX15
Бренд: H3C Страницы: 34
Ubee DDW3611 Setup Manual preview
DDW3611
Бренд: Ubee Страницы: 2
Loopcomm LP-8696C User Manual preview
LP-8696C
Бренд: Loopcomm Страницы: 75
Linksys Instant Wireless Series WAP54G User Manual preview
Instant Wireless Series WAP54G
Бренд: Linksys Страницы: 7
Kobian Wireless LAN Access Point User Manual preview
Wireless LAN Access Point
Бренд: Kobian Страницы: 35
ARGtek ARG-1220 Quick Installation Manual preview
ARG-1220
Бренд: ARGtek Страницы: 14
4IPNET EAP320 V1.20 Quick Installation Manual preview
EAP320 V1.20
Бренд: 4IPNET Страницы: 15
4gon Dovado Pro Quick Installation Manual preview
Dovado Pro
Бренд: 4gon Страницы: 24
MC Crypt MC Crypt Free1 User Manual preview
MC Crypt Free1
Бренд: MC Crypt Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды