manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 275

Device Configuration 5 - 215

Figure 5-119

Profile Overrides -WAN Backhaul screen

6. Refer to the 

WAN (3G) Backhaul 

configuration to specify WAN card settings:

7. Define or override the following authentication parameters from within the 

Basic Settings

 field:

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the Basic Configuration screen’s Device 
Overrides field and select Clear Overrides. This will remove all overrides from the device.

WAN Interface Name

Displays the WAN Interface name for the WAN 3G Backhaul card.

Reset WAN Card

If the WAN Card becomes unresponsive or is experiencing other errors click 
the Reset WAN Card button to power cycle and reboot the WAN card.

Enable WAN (3G)

Check this box to enable 3G WAN card support on the device. A supported 3G 
card must be connected to the device for this feature to work.

Username

Provide your username for authentication support by your cellular data carrier.

Password

Provide your password for authentication support by your cellular data carrier.

Access Point Name 
(APN)

Enter the name of the cellular data provider if necessary. This setting is needed 
in areas with multiple cellular data providers using the same protocols such as 
Europe, the middle east and Asia.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды