manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 439

Wireless Configuration 6 - 91

9. Select 

OK

 to update the Smart RF Channel and Power settings for this policy. Select 

Reset

 to revert to the last saved 

configuration. The Smart RF policy can be invoked at any point in the configuration process by selecting 

Activate 

SMART RF Policy

 from the upper, left-hand side, of the access point user interface.

10.Select 

Scanning Configuration

. Ensure Activate SMART RF Policy remains selected so the screen’s parameters can 

be updated. Additionally, the Smart Rf configuration cannot be applied to the access point profile unless this setting 
remains selected.

5.0 Channel Width

20 and 40 MHz channel widths are supported by the 802.11a radio. 20/40 
MHz operation (the default setting for the 5 GHz radio) allows the access 
point to receive packets from clients using 20 MHz of bandwidth while 
transmitting a packet using 40 MHz bandwidth. This mode is supported for 
11n users on both the 2.4 and 5 GHz radios. If an 11n user selects two 
channels (a Primary and Secondary channel), the system is configured for 
dynamic 20/40 operation. When 20/40 is selected, clients can take 
advantage of “wider channels.” 802.11n clients experience improved 
throughput using 40 MHz while legacy clients (either 802.11a or 
802.11b/g depending on the radio selected) can still be serviced without 
interruption using 20 MHz. Select 

Automatic

 

to enable the automatic 

assignment of channels to working radios to avoid channel overlap and 
avoid interference from external RF sources. 40MHz is the default setting.

2.4 GHz Channels

Use the 

Select 

drop-down menu to select the 2.4 GHz channels used in 

Smart RF scans.

2.4 GHz Channel 
Width

20 and 40 MHz channel widths are supported by the 802.11a radio. 20 MHz 
is the default setting for 2.4 GHz radios. 20/40 MHz operation (the default 
setting for the 5 GHz radio) allows the Access Point to receive packets from 
clients using 20 MHz of bandwidth while transmitting a packet using 40 
MHz bandwidth. This mode is supported for 11n users on both the 2.4 and 
5 GHz radios. If an 11n user selects two channels (a Primary and Secondary 
channel), the system is configured for dynamic 20/40 operation. When 
20/40 is selected, clients can take advantage of “wider channels.” 802.11n 
clients experience improved throughput using 40 MHz while legacy clients 
(either 802.11a or 802.11b/g depending on the radio selected) can still be 
serviced without interruption using 20 MHz. Select 

Automatic 

to enable 

automatic assignment of channels to working radios to avoid channel 
overlap and avoid interference from external RF sources. 20MHz is the 
default setting.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды