Motorola WiNG 5, Справочное руководство системы

Страница: 602 / 802

12 - 38 WiNG 5 Access Point System Reference Guide
Figure 12-22 Smart RF screen
2. Refer to the following to determine whether Smart RF calibrations or interactive calibration is required.
AP MAC Address Displays the hardware encoded MAC address assigned to each access
point radio within the RF Domain. This value cannot be modified as past of
a calibration activity.
Radio Index Displays a numerical index assigned to each listed access point radio
when it was added to the network. This index helps distinguish this radio
from others within the RF Domain with similar configurations. This value
is not subject to change as a result of a calibration activity, but each listed
radio index can be used in Smart RF calibration.
Old Channel Lists the channel originally assigned to each listed access point within the
RF Domain. This value may have been changed as part an Interactive
Calibration process applied to the RF Domain. Compare this Old Channel
against the Channel value to right of it (in the table) to determine whether
a new channel assignment was warranted to compensate for a coverage
hole.
Channel Lists the current channel assignment for each listed access point, as
potentially updated by an Interactive Calibration. Use this data to
determine whether a channel assignment was modified as part of an
Interactive Calibration. If a revision was made to the channel assignment,
a coverage hole was detected on the channel as a result of a potentially
failed or under performing access point radio within the RF Domain.