manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 338

5 - 278 WiNG 5 Access Point System Reference Guide

Figure 5-156

Profile Overrides - Management Firmware screen

11. Refer to the 

Auto Install via DHCP Option 

field to define automatic configuration file and firmware updates. 

12. Use the parameters within the 

Automatic Adopted AP Firmware Upgrade

 field to define an automatic 

firmware upgrade from a controller based file.

13. Select

 OK

 to save the changes and overrides made to the profile’s Management Firmware configuration. Select 

Reset

 to revert to the last saved configuration.

Configuration Update

Select the Configuration Update check box to enable automatic 
configuration file updates for the controller profile from a location external 
to the access point. 

If enabled (the setting is disabled by default), provide a complete path to 
the target configuration file used in the update.

Firmware Update

Select this option to enable automatic firmware updates from a user 
defined remote location. This value is disabled by default.

Select AP Type(s) for 
Auto Upgrade

Select the access point model to upgrade to a newer firmware version 
using its associated Virtual Controller AP’s most recent firmware file for 
that model. This parameter is enabled by default.

Number of Concurrent 
Upgrades.

Use the spinner control to define the maximum number (1 - 20) of adopted 
APs that can receive a firmware upgrade at the same time. Keep in mind 
that during a firmware upgrade, the access point is offline and unable to 
perform its normal wireless client support function until the upgrade 
process is complete.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды