Motorola WiNG 5 Скачать руководство пользователя

Страница: 675 / 802

Statistics 12 - 69

6. The

Specification

field displays the following:

7. The

Traffic

field describes the following for the selected access point interface:

Hardware Type

Displays the hardware type of the access point interface.

Index

Displays the unique numerical identifier supporting the interface.

Access VLAN

Displays the interface the VLAN can access.

Access Setting

Displays the mode of the VLAN as either

Access

Trunk

Administrative
Status

Displays whether the interface is currently

true

false

Media Type

Displays the physical connection type of the interface.

Medium types are:

Copper

- Used on RJ-45 Ethernet ports

Optical

- Used on fibre optic gigabit Ethernet ports

Protocol

Displays the name of the routing protocol adopted by the selected interface.

MTU

Displays the

maximum transmission unit

(MTU) setting configured on the

interface. The MTU value represents the largest packet size that can be sent
over a link. 10/100 Ethernet ports have a maximum setting of 1500.

Mode

The mode can be either:

Access

– This Ethernet interface accepts packets only from the native VLANs.

Trunk

– This Ethernet interface allows packets from a given list of VLANs that

you can add to the trunk.

Metric

Displays the metric value associated with the route through the selected
interface.

Maximum Speed

Displays the maximum speed at which the selected interface transmits or
receives data.

Admin. Speed

Displays the speed setting used when using the administrative interface.

Operator Speed

Displays the current speed of the data transmitted and received over the
interface.

Admin. Duplex
Setting

Displays the administrator’s duplex setting.

Current Duplex
Setting

Displays the interface as either half duplex, full duplex, or unknown.

Good Octets Sent

Displays the number of transmitted octets (bytes) with no errors.

Good Octets
Received

Displays the number of octets (bytes) with no errors received by the interface.

Good Pkts Sent

Describes the number of good packets transmitted.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WiNG 5

Отзывы:

Похожие инструкции для WiNG 5

Бренды по названию

Популярные бренды

Motorola WiNG 5, Справочное руководство системы

Результаты поиска

Содержание WiNG 5

Отзывы:

Похожие инструкции для WiNG 5

Бренды по названию

Популярные бренды