Motorola WiNG 5 Скачать руководство пользователя страница 570

Страница: 570 / 802

12 - 6 WiNG 5 Access Point System Reference Guide

4. If needed, select

Advanced

to expand the dialog to display network address information to the location of the

firmware. The number of additional fields that populate the screen is also dependent on the selected protocol.

Figure 12-3

Advanced Firmware Upgrade screen

5. Provide the following information to accurately define the location of the target device’s firmware file:

6. Select

to start the firmware update. Select

Abort

to terminate the firmware update. Select

Close

to close

the upgrade popup. The upgrade continues in the background.

Protocol

Select the protocol used for updating the firmware. Available options
include:

• tftp

• ftp

• sftp

• http

• cf

• usb1

• usb2

Port

Use the spinner control or manually enter the value to define the port
used by the protocol for firmware updates. This option is not valid for

usb1

, and

usb2

IP Address

Enter IP address of the server used to update the firmware. This option
is not valid for

usb1

, and

usb2

Hostname

Provide the hostname of the server used to update the firmware. This
option is not valid for

usb1

, and

usb2

Path/File

Specify the path to the firmware file. Enter the complete relative path
to the file on the server.

User Name

Define the user name used to access either a FTP or SFTP server.

This field is only available if the selected protocol is

ftp

sftp.

Password

Specify the user account password to access the FTP or a SFTP server.

This field is only available if the selected protocol is

ftp

sftp.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WiNG 5

Отзывы:

Бренды по названию

Популярные бренды

Motorola WiNG 5, Справочное руководство системы

Результаты поиска

Содержание WiNG 5

Отзывы:

Бренды по названию

Популярные бренды