manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 196

5 - 136 WiNG 5 Access Point System Reference Guide

5.3.9.1 Profile Services Configuration and Deployment Considerations

Profile Services Configuration

Before defining a profile’s captive portal and DHCP configuration, refer to the following deployment guidelines to 
ensure the profile configuration is optimally effective: 

• A profile plan should consider the number of wireless clients allowed on the profile’s guest (captive portal) 

network and the services provided, or if the profile should support guest access at all.

• Profile configurations supporting a captive portal should include firewall policies to ensure logical separation is 

provided between guest and internal networks so internal networks and hosts are not reachable from guest 
devices.

• DHCP’s lack of an authentication mechanism means a DHCP server supported profile cannot check if a client or 

user is authorized to use a given user class. This introduces a vulnerability when using user class options. Ensure 
a profile using DHCP resources is also provisioned with a strong user authorization and validation configuration.

5.3.10 Profile Management Configuration

The access point has mechanisms to allow/deny management access to the network for separate interfaces and 
protocols (

HTTP, HTTPS, Telnet, SSH 

or 

SNMP

). These management access configurations can be applied strategically 

to profiles as resource permissions dictate. 

Additionally, an administrator can define a profile with unique configuration file and device firmware upgrade 
support.

To define a profile’s management configuration:

1. Select the 

Configuration 

tab from the Web UI.

2. Select 

Devices

.

3. Select 

System Profile

 from the options on left-hand side of the UI.

4. Expand the 

Management 

menu item and select 

Settings

.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды