manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Motorola WiNG 5 - это инновационное решение для беспроводных сетей. Устройство предоставляет доступ к System Reference Manual для детального понимания работы продукта. Пользователи могут скачать этот руководство бесплатно на manualshive.com. Узнайте больше о возможностях WiNG 5 и оптимизируйте свою беспроводную сеть.

Поделиться
Скачать
background image

Appendix B Publicly Available Software B - 19

15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT 

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS 
AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED 
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH 
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR 
CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR 
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU 
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF 
THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING 
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO 
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES.

                                           

END OF TERMS AND CONDITIONS 

B.3.3 BSD Style Licenses

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:

1. Redistributions of source code must retain the above copyright notice, and the entire permission notice in its entirety, 

including the disclaimer of warranties.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following 

disclaimer in the documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific 

prior written permission.

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE 
HEREBY DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.

Copyright (c) 1988 Regents of the University of California. All rights reserved. Redistribution and use in source and binary 
forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that 
any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the 
software was developed by the University of California, Berkeley. The name of the University may not be used to endorse 
or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED 
``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED 
WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.

B.3.4 MIT License

Copyright 1987, 1988 by MIT Student Information Processing Board. Permission to use, copy, modify, and distribute this 
software and its documentation for any purpose is hereby granted, provided that the names of M.I.T. and the M.I.T. S.I.P.B. 
not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. 

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WiNG 5

D-Link Rangebooster N 650 Access Point DAP-1353 User Manual preview
Rangebooster N 650 Access Point DAP-1353
Бренд: D-Link Страницы: 67
D-Link DWL-1000AP Quick Install Manual preview
DWL-1000AP
Бренд: D-Link Страницы: 8
D-Link COVR-2202 Simple Setup Manual preview
COVR-2202
Бренд: D-Link Страницы: 2
D-Link DAP-1155 Quick Install Manual preview
DAP-1155
Бренд: D-Link Страницы: 3
D-Link Air Premier DAP-2695 Command Line Interface Reference Manual preview
Air Premier DAP-2695
Бренд: D-Link Страницы: 39
D-Link AirPlus DI-714P+ Brochure preview
AirPlus DI-714P+
Бренд: D-Link Страницы: 5
D-Link AC5300 Quick Install Manual preview
AC5300
Бренд: D-Link Страницы: 12
D-Link SharePort DIR-825 Configuring preview
SharePort DIR-825
Бренд: D-Link Страницы: 20
D-Link Express EtherNetwork DI-604 Owner'S Manual preview
Express EtherNetwork DI-604
Бренд: D-Link Страницы: 49
H3C WA6020 Installation Manual preview
WA6020
Бренд: H3C Страницы: 27
Fortinet FortiAP 112D Quick Start Manual preview
FortiAP 112D
Бренд: Fortinet Страницы: 11
Deliberant DLB70XX User Manual preview
DLB70XX
Бренд: Deliberant Страницы: 69
VKOM 403NR User Manual preview
403NR
Бренд: VKOM Страницы: 20
Linksys WM54G User Manual preview
WM54G
Бренд: Linksys Страницы: 25
Motorola AP-8132 Installation Manual preview
AP-8132
Бренд: Motorola Страницы: 54
Motorola AP-7131N-FGR Product Reference Manual preview
AP-7131N-FGR
Бренд: Motorola Страницы: 708
Motorola AP-7562 Installation Manual preview
AP-7562
Бренд: Motorola Страницы: 68
Motorola AP-7131N-FGR Installation Manual preview
AP-7131N-FGR
Бренд: Motorola Страницы: 66

Бренды по названию

Популярные бренды

Загрузить еще бренды