manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 364

6 - 16 WiNG 5 Access Point System Reference Guide

7. Define the

 Fast Roaming

 configuration used only with 802.1x EAP-WPA/WPA2 authentication.

Using 802.11i can speed up the roaming process from one access point to another. Instead of doing a complete 
802.1x authentication each time a client roams between access points, 802.11i allows a client to re-use previous 
PMK authentication credentials and perform a four-way handshake. This speeds up the roaming process. In 
addition to reusing PMKs on previously visited APs, Opportunistic Key Caching allows multiple APs to share PMKs 
amongst themselves. This allows a client to roam to an AP it has not previously visited and reuse a PMK from 
another AP to skip 802.1x authentication.

8. Set the following 

Advanced

 settings for the WPA/WPA2-TKIP encryption scheme 

9. Select 

OK

 when completed to update the WLAN’s WPA/WPA2-TKIP encryption configuration. Select 

Reset

 to 

revert the screen back to its last saved configuration.

Broadcast Rotation 
Interval

When enabled, the key indices used for encrypting/decrypting broadcast 
traffic will be alternatively rotated based on the defined interval Define an 
interval for broadcast key transmission in seconds (30-86,400). Key rotation 
enhances the broadcast traffic security on the WLAN. This feature is disabled 
by default.

Pre-Authentication

Selecting the Pre-Authentication option enables an associated client to carry 
out an 802.1x authentication with another access point before it roams to it. 
This enables a roaming client to send and receive data sooner by not having to 
conduct an 802.1x authentication after roaming. With pre authentication, a 
client can perform an 802.1X authentication with other detected access points 
while still connected to its current access point. When a device roams to a 
neighboring access point, the device is already authenticated on the access 
point, thus providing faster re-association. This feature is enabled by default.

TKIP Countermeasure 
Hold Time

The TKIP countermeasure hold-time is the time during which the use of the 
WLAN is disabled, if TKIP countermeasures have been invoked on the WLAN. 
Use the drop-down menu to define a value in either 

Hours

 (0-18), 

Minutes

 

(0-1,092) or 

Seconds

 (0-65,535). The default setting is 60 seconds.

Exclude WPA2-TKIP

Select this option to advertise and enable support for only WPA-TKIP. This 
option can be used if certain older clients are not compatible with newer 
WPA2-TKIP information elements. Enabling this option allows backwards 
compatibility for clients that support WPA-TKIP and WPA2-TKIP, but do not 
support WPA2-CCMP. Motorola Solutions Solutions recommends enabling this 
feature if WPA-TKIP or WPA2-TKIP supported clients operate in a WLAN 
populated by WPA2-CCMP enabled clients. This feature is disabled by default.

NOTE: 

WPA-TKIP is not supported on radios configured to exclusively use 802.11n.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды