Motorola WiNG 5, Справочное руководство системы

Страница: 381 / 802

Wireless Configuration 6 - 33
15.Set a Firewall Session Hold Time in either Seconds (1 - 300) or Minutes (1 - 5). This is the hold time for caching
user credentials and Firewall state information when a client roams. The default setting is 30 seconds.
16.Select OK when completed to update this WLAN’s Firewall settings. Select Reset to revert the screen back to its last
saved configuration.
WLAN Firewall Deployment Considerations
Before defining an access control configuration on a WLAN, refer to the following deployment guidelines to ensure the
configuration is optimally effective:
• IP and non-IP traffic on the same Layer 2 interface can be filtered by applying both an IP ACL and a MAC ACL to the
interface.
6.1.4 Configuring Client Settings

Wireless LANs
Each WLAN can maintain its own client setting configuration. These settings include wireless client inactivity timeouts
and broadcast configurations. An AP-7131, AP-6532 or AP-7161 model access point can support up to 256 clients per
access point. An AP-6511 or AP-6521 model can support up to 128 clients per access point. Thus, client load balancing
can be enforced for the WLAN as more and more WLANs are deployed.
1. Select Configuration > Wireless > Wireless LANs to display a high-level display of the existing WLANs available
to the wireless network.
2. Select the Add button to create a new WLAN, or select and existing WLAN and Edit to modify the properties of an
existing WLAN.
3. Select the Client Settings tab.
Blacklist Duration Select the checkbox and define a setting between 0 - 86,400 seconds.
Once the blacklist duration has been exceeded, offending clients can
reauthenticate.