manualshive.com logo in svg

Motorola WiNG 5, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5 Скачать руководство пользователя страница 319

Device Configuration 5 - 259

5.10.2.13 Overriding a Miscellaneous Network Configuration

Overriding the Network Configuration

An access point profile can be configured to include a hostname in a DHCP lease for a requesting device and its profile. 
This helps an administrator track the leased DHCP IP address by hostname for a device profile. When numerous DHCP 
leases are assigned, an administrator can better track the leases when hostnames are used instead of devices.

To include a hostnames in DHCP request:

1. Select 

Devices 

from the Configuration tab.

2. Select a target device from the Device Browser in the lower, left-hand, side of the UI.

3. Select

 Profile Overrides

 from the Device menu to expand it into sub menu options.

4. Select 

Network

 to expand its sub menu options.

5. Select 

Miscellaneous

.

Figure 5-144

Profile Overrides - Network Miscellaneous screen

6. Select the 

Include Hostname in DHCP Request

 checkbox to include a hostname in a DHCP lease for a requesting 

device. This feature is disabled by default.’

7. Select the

 DHCP Persistent Lease

 checkbox to retain the last DHCP lease used across a reboot if the access point’s 

designated DHCP server is unavailable. This feature is enabled by default.

8. Select the 

OK

 button to save the changes and overrides. Select 

Reset

 to revert to the last saved configuration.

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the Basic Configuration screen’s Device 
Overrides field and select Clear Overrides. This will remove all overrides from the device.

Содержание WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды