Motion Control Engineering Nidec iControl, Руководство пользователя, Страница: 90 / 453

4-1
In This Section
This section describes final adjustment inspection of the elevator. At this point, all steps in Sec-
tions 2 and 3 should have been completed.
• Learning the Floor Heights (see page 4-2 ).
• Verifying One-Floor Run Operation (see page 4-3 ).
• Reaching Contract Speed (see page 4-6 ).
• Learning Normal & Emergency Terminal Limit Switches (see page 4-8 ).
• Shaping the Speed Profile (see page 4-12 ).
• Controlling the Start of Car Motion (see page 4-16 ).
• Calibrating the Floor Offsets (see page 4-22 ).
• Adjusting Leveling and Final Stop (see page 4-25 ).
• Load Weigher Adjustment for Dispatching (see page 4-30 ).
• Pre-Start Sequence (see page 4-35 ).
• Calibration and Verification of Safety Functions (see page 4-40 ).
• Safety Tests (see page 4-42 ).
• Terminal Switch Faults (see page 4-54 ).
Final Adjustment