Morooka MST-800VD, Руководство по эксплуатации и техническому обслуживанию

Страница: 63 / 134

2-29
(1) Check around engine
Check for dead leaves, waste paper, dust, oil, grease, or other flammable materials, and check for leakage of fuel, oil, or coolant
from the engine. Remove any flammable materials, and repair any abnormalities.
Check for hanging electrical wires, loose connections, or signs of burns around the starting motor, alternator, battery, or battery
relay. Repair any abnormality.
(2) Check inside front grill
Check the front surface of the radiator, oil cooler and inter cooler for dead leaves, waste paper, dust, or other flammable
materials or materials which cause clogging. Remove any such materials.
(3) Check undercarriage (rubber crawler, track roller, carrier roller, sprocket, idler)
Check for any wear, breaks, or cracks. Check for any loose or missing nuts or bolts. Tighten if necessary and repair any
abnormalities.
(4) Check under machine
Check the hydraulic tank and fuel tank for leakage, and check the ground under the machine for traces of oil, fuel, or coolant. If
any signs of leakage are found, check for the source of the leakage and repair any abnormality.
Check for loose or missing nuts and bolts from the undercover and other parts, and tighten if necessary.
(5) Check dump body, safety bar
Check for any wear, breaks, or cracks. Check for any loose or missing nuts, bolts, or connecting pins. Tighten if necessary and
repair any abnormalities.
Check for any leakage of oil from the hydraulic hoses or hydraulic cylinders, and repair any abnormality.
(6) Check mirrors, lamps, instrument panel
Check for any damage to the mirrors, lamps, or meters, and repair or replace if there is any abnormality.