Morooka MST-800VD, Руководство по эксплуатации и техническому обслуживанию

Страница: 124 / 134

3-30
[7] CHECK ELECTRIC WIRING
If any tool touches between the battery positive (+) terminal and the chassis, there is danger that sparks will be
caused. Do not put tools and other metal objects in your breast pocket. They may fall out.
• Open the battery inspection cover, and check for looseness of the battery terminal, looseness of the ground connection and
battery relay wiring, and for signs of short circuits.
• Open the engine inspection cover, and check for loose starting motor wiring and signs of short circuits.
• Open the engine inspection cover, and check loose alternator wiring and signs of short circuit.
[8] CHECK OPERATION OF SWITCHES, LAMPS, GAUGES
• Turn the starting switch to the ON position and check that the monitor lamps light up.
• Turn the starting switch to the ON position, operate the lamp switch and flasher switch (turn signal indicator) inside the
combination switch, and check that each lamp lights up.
If any lamp does not light up, the bulb is probably blown or there is a disconnection, so contact your distributor.
• Turn the starting switch to the ON position, operate the Hi-Lo speed range selector switch, and check that the high speed
travel lamp on the instrument panel lights up.
If high speed travel lamp does not light up, the bulb is probably blown or there is a disconnection, so contact your distributor.
• Turn the starting switch to the ON position, press the parking brake switch, and check that the parking lamp on the instrument
panel lights up.
If parking lamp does not light up, the bulb is probably blown or there is a disconnection, so contact your distributor.
• Turn the starting switch to the ON position, operate the wiper switch, and check that the wiper motor action.
Applicable to Cab Specifications.
If wiper motor does not acting, there is probably a failure or disconnection in the waiper motor, so contact your distributor.
• Turn the starting switch to the ON position, operate the heater switch, and check that the car heater function.
Applicable to Cab Specifications.
If car heater does not function, there is probably a failure or disconnection in the car heater, so contact your distributor.
[9] CHECK OPERATION OF HORN, ALARM BUZZER
• Turn the starting switch to the ON position, push the horn switch inside the combination switch, and check that the horn
sounds.
If the horn does not sound, there is probably a failure or disconnection in the horn, so contact your distributor.
• Turn the starting switch to the ON position, press the parking brake switch and check that the buzzer sounds.
If the parking brake buzzer does not sound, there is probably a failure or disconnection in the buzzer, so contact your
distributor.
• Turn the starting switch to the ON position, operate the travel lever to the REVERSE position and check that the backup
buzzer sounds.
If the backup buzzer does not sound, there is probably a failure or disconnection in the buzzer or backup buzzer switch, so
contact your distributor.