1-12
5. PRECAUTIONS WHEN TRAVELING
CHECK FOR SAFETY IN SURROUNDING AREA
Always check that there are no people in the surrounding area. Be particularly careful to check behind
the machine.
• If the dump body is raised, always lower it.
• Sound the horn to warn people in the area that you are about to start the machine.
AVOID SUDDEN OPERATIONS EXCEPT IN EMERGENCIES
Do not suddenly start, suddenly stop, or suddenly turn the machine or
carry out any other operation suddenly. Such operations may cause
the crawler to come off and the machine to tip over.
• When starting or turning the machine, operate the travel lever
slowly. Run the engine at low speed.
• Return the travel lever slowly to the N position. Apply the brake to
stop the machine.
• If the travel lever is moved too far beyond the N position to the
REVERSE (or FORWARD) position, the engine will run in reverse,
or other problems will occur.
• Do not use the parking brake to stop the machine.
• If a dangerous state occurs by any possibility, and when it becomes
necessary to stop the machine urgently, press the parking brake
switch to set it to the STOP position or turn the engine starting
switch to the OFF position to stop the engine.
TRAVEL CAREFULLY ON UNEVEN GROUND OR ON CURVES
When traveling on uneven ground or in places where there are many curves, reduce the travel speed
and travel carefully. If the machine is traveling at high speed it may turn over or crawler may come off.
NO TRAVELING ON PUBLIC ROADS
This machine is not permitted to travel on public roads.
When moving the machine, always transport it by truck or trailer.
BE CAREFUL OF ROAD SHOULDERS
When traveling on narrow agricultural roads, always follow the
precautions below.
• Do not travel too close to the road shoulder, and travel at reduced
speed.
• Do not travel on any soft road shoulder or place covered with grass.
• During or after rain, the danger of landslides and falling rocks
increases. Always travel at low speed and check that the area is
safe.
Содержание MST-800VD
