Morooka MST-800VD, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 134

1-15
6. PRECAUTIONS FOR OPERATION
USE SIGNALS
When carrying out work with one or more workers, or when using a
signalman, determine the signals and the person in charge before
starting work, and always follow the agreed procedure.
Even when using a signalman, always pay careful attention to the
following.
• When working in confined spaces or indoors, be careful not to hit
the surroundings or the ceiling.
• When operating in urban areas or on roads, put up fences around
the jobsite and take steps to ensure the safety of passing traffic and
pedestrians.
MAKE JOBSITE FLAT
Make the jobsite flat. This will not only increase the efficiency but will also ensure safety.
If the jobsite is dusty, spray water to ensure the visibility.
OPERATE DUMP BODY CAREFULLY
When carrying out dumping operations, be careful of the following.
• Check that there is no person or obstacle near the dump body.
• Stop the machine at the determined point and operate the dump in
accordance with signals from the signalman.
• Block the tracks to prevent the machine from moving in reverse.
• When dumping on slopes, there is danger of the machine tipping
over. If it is felt that there is danger to the machine, stop the
operation immediately.
NO OVERLOADING
Never load the machine above its capacity.
Overloading will not only cause failures, but will also cause
overrunning and tipping over on slopes.
LOAD DUMP BODY EVENLY
• Do not load the dump body on one side. Always spread the load to
maintain the balance in the dump body.
• When carrying long objects, such as timber or steel beams, give
careful consideration to the position of the center of gravity of the
load, and secure with ropes.
• When stacking U-shaped ditch liners or concrete blocks, lay a plate
down first and secure with ropes to prevent the load from slipping.