Morooka MST-800VD, Руководство по эксплуатации и техническому обслуживанию

Страница: 57 / 134

2-23
2.12 CAB DOOR LOCK RELEASING LEVER Applicable to Cab Specifications
When keeping the door open, open the door until it is locked securely
in the latch on the cab.
Cab door lock releasing lever use
• Push door latch release lever (1) down.
The door latch is released and it is possible to close the door.
2.13 OPENING AND CLOSING CAB FRONT DOOR
Applicable to Cab Specifications
• When opening the front window, push it back fully into the roof. If it is not pushed in fully, the front window may
suddenly return to its original position and cause an unexpected accident.
• When closing the front window, lower the front window slowly and be careful not to get your fingers caught.
• After closing the front window, always set the lock lever to the LOCK position.
[1] METHOD OF OPENING FRONT WINDOW
1. Hold left and right lock levers (2) of the front window (1), and push down to
FREE position.
2. Hold left and right grips (3), and then pull front window (1) up slowly and
push it to the rear. Front window (1) is stored inside the roof.
[2] METHOD OF CLOSING FRONT WINDOW
1. Hold left and right grips (3) of front window (1) stowed in the roof, and then
pull front window (1) to front slowly and push it to the down.
2. Hold left and right lock levers (2) of the front window (1), and push up to
LOCK position.
When pushing up the lock lever (2) to LOCK position, check the pin (4) is
inserted to lock hole (A) securely.