2-20
[2] ADJUSTMENT OF RECLINING ANGLE
Sit in the seat, use reclining adjustment lever (2) at the seat left back side to
adjust the reclining angle.
1. While pulling lever (2) up, sit up straight to move your back away from the
backrest. The backrest tilts forward.
2. While pulling lever (2) up, press your back against the backrest, and keep
pressing until the backrest reaches your desired position.
3. Take your hand off lever (2), and press the backrest slightly to lock the seat.
[3] ADJUSTMENT OF SEAT FRONT - REAR SLIDE
Sit in the seat, use front-rear slide lever (3) at the seat forward under right side
to adjust.
1. While pulling lever (3) to the right, move the seat forward or backward to set
it to a desired position.
2. Take your hand off lever (3), and press the seat slightly to lock the seat.
[4] ADJUSTMENT OF SEAT HEIGHT
Use seat front height adjustment lever (4) at the lower front side of the seat and
seat rear height adjustment lever (6) at the rear right side to adjust the seat
height. Do not sit in the seat during adjustment.
[Adjustment of seat front height]
Guide at the front (5) can be adjusted in four levels.
(1) Hold lever (4) and the front side of the seat together, and pull lever (4) up.
(2) While holding lever (4), hold the front side of the seat surface, and set
guide (5) to a desired position.
(3) Take your hand off lever (4), and press the seat surface slightly to lock
the seat.
[Adjustment of seat rear height]
Guide at the rear (7) can be adjusted in five levels.
(1) Hold lever (6) and pull it up.
(2) While holding lever (6), hold the rear side of the seat surface, and set
guide (7) to a desired position.
(3) Take your hand off lever (6), and press the seat surface slightly to lock
the seat.
[5] ADJUSTMENT OF ARMREST HEIGHT
Using dial (8) under the armrest (9), adjust the height of the armrest.
Raise armrest (9) and turn dial (8) under the armrest.
• Turn to right: Armrest goes down.
• Turn to left: Armrest goes up.
The maximum height is the horizontal position.
Содержание MST-800VD
