Morooka MST-800VD, Руководство по эксплуатации и техническому обслуживанию

Страница: 101 / 134

3-7
REMARK
• When fuel sulphur content is less than 0.5 %, change oil in the oil pan every periodic maintenance hours described in this
manual.
Change oil according to the following table if fuel sulphur content is above 0.5%.
Fuel sulphur content Change interval of oil in engine oil pan
0.5 to 1.0% 1/2 of regular interval
Above 1.0% 1/4 of regular interval
• When starting the engine in an atmospheric temperature of lower than 0 deg C, be sure to use engine oil of SAE10W-30 and
SAE15W-40, even though an atmospheric temperature goes up to 10 deg C more or less in the day time.
• Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half.
• There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil
that matches the temperature in the table.
• We recommend genuine oil which has been specifically formulated and approved for use in engine and hydraulic work
equipment applications.
Specified capacity: Total amount of oil including oil for components and oil in piping.
Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance.
ASTM: American Society of Testing and Material
SAE: Society of Automotive Engineers
API: American Petroleum Institute
• Hydraulic oil: Nihon Sekiyu Highland Wide KV46.
When changing the hydraulic oil, please contact your distributor.