75
1)Operation
Use the handles to line the light up.
Push back the switch on the bottom of the light to turn it ON.
Pull it forward to turn the light OFF.
If the unit has the auto light function (see (4)below), the light can be
turned on and off automatically or with the switch on the switch
panel.
2)Settings
The following settings can be made for the Luna Vue ED Light:
>>On and Off Switch
(See [5] 3. (5) 8) of this manual.)
(A)Turn light on and off
>>Display Selection
(See [5] 3. (7) 4) of this manual.)
(B)Adjust brightness (8 levels)
>>User Settings
(See [5] 3. (7) 7) of this manual.)
(C)Operating light on and off options.
(Turns on and off when handpieces are picked up and returned.)
13. Operating Light
(1)Luna Vue ED Light
Operating light on and
off switch
WARNING
Do not touch the lamp, front cover, reflector or any metal parts when the
light is on or immediately after it is turned off. Do not use the light with the
front cover taken off. Do not use any part except the handle to move the
light.
>>These parts are extremely hot and could cause a burn; also the lamp could
break.Do not bump or jar the light head or the light arm.
Do not get the light wet; if it happens to get wet, turn off the main switch
and remove all moisture immediately with a dry cloth. Do not use the
light until it is completely dry.
>>
Otherwise an accident could occur resulting in bodily injury or equipment
damage.
Follow the directions and put the front cover on correctly and securely.
Replace the front cover immediately if it is discolored, deformed, cracked
or otherwise damaged.
>>If the cover is not correctly installed or damaged, it could fall off and cause a
serious injury.
*: Option
Switch Pull : Off
Push : On
[5]Operation 13.(1)