19
2)Cancel
Use this to stop the chair during auto-positioning. If the chair has a
shock-free stop function, it will function normally. Use any one of the
following methods:
(A)Press any of the auto-positioning switches on either the
doctor or assistant’s side.
(B)Press any of the manual positioning switches on the doctor’s
switch panel.
Even if the chair does not have speed control,
pressing the speed control switch will stop it.
(C)Operate any of the manual positioning functions on the foot
control.
(Seat or back rests, up or down, will all stop the chair.)
(2)Emergency Stop for Auto-positioning,
Cancel, and afety Stop
Use the procedures listed below to stop the chair in the midst of auto-
positioning is being carried out. In the case of a Safety Stop, the chair
stops automatically and goes into Avoidance Mode. This means it will
reverse its direction slightly after stopping. Whenever the chair stops
while auto-positionig is being carried out, the color of the lamp for the
positioning switch changes to amber.
1)Emergency Stop
Use this in the case of imminent danger.
Even if the chair has a shock-free stop function, it will stop instantly
when either of the following methods is used:
(A) Stepping on the foot pedal.
(B) Turning off the main switch.
(Ｂ)
（Ｂ）
(both doctor and assistant side)
（Ｃ）
(doctor side)
(Ａ)
(Ａ)
ADVICE
[5]Operation 3.(2)
Lamp color
changes to
amber for
emergency
stop
(Auto-positioning Switch)