58
7. Basin Unit
(1)Basin Unit
1)Open and Close Door
Do this to clean the vacuum tank and perform other maintenance
inside the basin unit.
a)Open the door by pressing on the catch in the center along the right
hand side. The door opens at an angle of approximately 90 degrees.
b)Close the door by pushing it in until the catch holds it closed.
2)Remove the Cover
Remove the cover to perform various maintenance procedures inside
the basin unit.
a)Open the door to an angle of approximately 45 degrees.
The door will not come off if it is opened to an angle
of 90 degrees.
b)Grip the door and pull it straight up to pull the pin out of the hinge.
Now pull the door off.
c)Reverse the above procedure to replace the cover.
Line up the pin on the bottom first and then the pin on the top.
WARNING
CAUTION
Never lean on or sit on the basin unit. Do not set heavy objects on it or allow
any excessive force to be applied to it.
>>Any of the above actions could cause the unit to suddenly turn resulting in an
accident, bodily injury or damage to equipment.
Do not move the seat or backrest if the door on the basin unit is open.
>>Doing so could cause an injury or damage.
Ensure the area is clear of obstacles before opening the door.
>>Otherwise the door or other equipment could be damaged.
ADVICE
[5]Operation 7.(1)
Door
Press
on Catch
Pin
Basin Unit （opened）