48
Instrument Selection and Settings:
>>
Instrument Selection Switches
Frequently used during treatment. Press the switch for the instru-
ment that has been picked up.
The selected instrument is identified by the LED above its switch.
(Refer to [5] 3. (5) 5) to 7) of this manual.)
>>
Setting Switches
Use low frequency before treatment. Switch settings apply to the
instrument that has been picked up. Settings are shown in the display.
(Refer to [5] 3. (5) 4) of this manual.)
>>
User Settings
Used for adjustments before beginning treatment.
Use Set Switches to check and make adjustments on the various
displays. (Refer to [5] 3. (7) 9) of this manual.)
>>
Extended Function Levers
*
These foot control levers can be used instead of some or the most
frequently used switches. They apply to whichever instrument is se-
lected for use (picked up).
Settings are shown by the LED for the corresponding switch on the
switch panel.(Refer to [5] 2.(3) 2)of this manual.)
>>
Flow Adjustment Knobs
Use these to adjust the air and water flow for each of the instruments.
(Refer to section (9) below.)
Level 1
Level 2
[5]Operation 6.
*: Option