46
(2)Assistants Holder
Assistant’s
auxiliary
tray
Holder
Never place a load greater than 9.8 N (1 kgf) on the
assistant’s auxiliary tray.
>>
This could seriously damage it.
CAUTION
The holder rotates horizontally and its arm swivels horizontally to the
outside. Also the arm moves in and out. Set the holder in the most
convenient position. To adjust the position of the holder and its arm,
grip both sides of the holder firmly and move it carefully.
1)Assistant’s Auxiliary Tray
An auxiliary tray is built into the holder.
2)Main Tube Disconnection
These tubes are easily disconnected.
a)Disconnect the tubes from the basin unit.
<Three-way Syringe>
Hold down the lock button and pull the tube straight off.
<Vacuum Syringe and Saliva Ejector>
Grip the connector firmly and pull the tube straight off.
3)Main Tube attachment
a)Plug each tube into its connector on the basin unit.
<Three-way Syringe>
Line the connector up with its mate and push it straight on.
Match the colors of the tube and basin unit
connectors.
Do not hold down the lock button and push the
connector in until an audible click is heard.
<Vacuum Syringe and Saliva Ejector>
Grip the connector firmly and push it straight all the way into its
mate on the basin unit.
CHECK
ADVICE
[5]Operation 5.(2)
ＶＳ ３ＷＡＹ ＳＥ
Pull
Pull
Lock
button
（Basin unit
connectors）