mori seiki NL1500/500, Руководство по обслуживанию, Страница: 226 / 245

ʎ˂ʵʡʴʅʍʉʃʉɮʳʃʠʶ˂ɹʃʐʪɁ̬૰
TOOL PRESETTER STYLUS BREAK STEM REPLACEMENT
226
14
ʎ˂ʵʡʴʅʍʉʃʉɮʳʃʠʶ˂ɹʃʐʪɁ̬૰
TOOL PRESETTER STYLUS BREAK STEM REPLACEMENT
ʃʉɮʳʃʠʶ˂ɹʃʐʪɂǾʃʉɮʳʃȻࡾщȽȼɁࢱຒ
ȾɛɝǾʃʉɮʳʃȾ២ᔸɗᚗ଒ȟӏɢȶȲکնȾ੸ૺȪǾ
ʃʉɮʳʃɁ۰ढɗʅʽɿటͶɁૺϾɥ᩻ȡɑȬǿ The stylus break stem device protects the stylus from
deformation and sensor damage by collapsing in the event of
excessive pressure or jolting due to interference between the
stylus and the tool.
ᴹ̬૰֚ఙᴻ
<Replacement Interval>
ࡾщȻɁࢱຒȽȼȾɛɝ੸ૺȪȲȻȠ When stylus break stem is damaged due to interference with
the tool
ᴹႊ৙ȬɞɕɁᴻ
<Necessary Tools>
•
фᜏʶʽʋ • Hex wrench
ᴹਖ਼ᬲᴻ
<Procedure>
1)
ʓɬɮʽʉʷʍɹᤣ੻ɷ˂ʃɮʍʋȟ Ȑᣮࢠȑ ȾȽȶȹȗ
ɞȦȻɥᆬᝓȬɞǿ
1)
Confirm that the door interlock key-switch is placed at the
[NORMAL]
setting.
2)
ʓɬɥᩒȤɞǿ
2)
Open the door.
3)
Ȑ᫿ࢠϦඨȑ ʦʉʽɥઃȪǾൡಽ᫿ࢠϦඨ࿡ৰȾȬɞǿ
3)
Press the
[EMERGENCY STOP] (Emergency Stop)
button to set the machine in the emergency stop state.
1
ҝёൡಽ଩ͽᝢ஥ం
“
Ȑ᫿ࢠϦඨȑ ʦʉʽȾɛɞ፯ॲϦඨ
/
ᜓ᪍஁ศ
”
1
Refer to the separate volume, OPERATION MANUAL
“Executing an Emergency Stop with the
[EMERGENCY
STOP] (Emergency Stop)
Button, and Canceling the
Emergency Stop Status”
4)
M3
Ɂфᜏሰ͇Ƞඨɔɀȫɥ፿ɔȹǾʃʉɮʳʃʋʍʡ
ɬʍʅʽʠʴɥ՘ɝ۶Ȭǿ
4)
Loosen the M3 socket set screw and remove the stylus tip
assembly.
5)
фᜏʶʽʋȺɀȫ
2
ኙ੔ɥ፿ɔȹǾʃʉɮʳʃɥ՘ɝ۶
Ȭǿ
5)
Using a hex wrench, loosen the two screws and remove the
stylus.
✟
Stylus (Break Stem Installed Internally)
Arm
ʃʉɮʳʃᴥю᥂Ⱦʠʶ˂ɹʃʐʪȟȕɝɑȬᴦ
ɬ˂ʪ
Loosen
፿ɓ