Molift Rail System Скачать руководство пользователя страница 49

Страница: 49 / 112

325

679,4

Bill of materials:

Material.

Comment.

Dimension/

Draw. no.

Description.

Qty.

Pos.

19-313 BOM.xls

Ref. EO 65/2011

10.06.2011/TES

TÅB

Released for production

09.05.2010/TES

TÅB

Rev.

Description:

Date/Sign.

Approved:

Size

Designed/Drawn: Date:

Scale:

Projection:

tes

1:5

19-313

Drawing number:

26/04-2010

Drawing name:

Cover Assy CC Switch MRS Grey

Switch CC Grey

Molift Rail System

680

352

Bill of materials:

Material.

Comment.

Dimension/

Draw. no.

Description.

Qty.

Pos.

19-285 BOM.xls

Ref EO 65/2011

10.06.2011/TES

TÅB

Ref. EO 59/2010

09.06.2010/TES

TÅB

Released for production

26.04.2010/TES

TÅB

Rev.

Description:

Date/Sign.

Approved:

Size

Designed/Drawn: Date:

Scale:

Projection:

tes

1:5

19-285

Drawing number:

26/04-2010

Drawing name:

Cover Assy CC Switch MRS Grey

Switch CC Grey

Molift Rail System

Figure 56. Covers, switches, open and closed ceiling panels

Article number

Description

1109085

Cover assy oc switch MRS, grey

1109086

Cover assy oc switch MRS, white

1109077

Cover assy cc switch MRS, grey

1109078

Cover assy cc switch MRS, white

MRS switch covers are ordered and supplied separately. The covers are supplied painted white or
grey and with M4x8 bolts for assembly.

Figure 57.

Mounting kit, fitting of switch system directly to ceiling

Part no.

Description

1109360

DC mounting kit for switch, concrete

1109365

DC mounting kit for switch, hollow core concrete

1109366

DC mounting kit for switch, wood

1109360

1109365

1109366

Rev E 10/2011

Chapter 3 - Choice of parts and ordering

Page 47 of 100

Switch systems

Содержание Rail System

















































































































Результаты поиска

Содержание Rail System

Отзывы:

Molift Rail System, Проектирование и установка устройства, Страница: 49 / 112

Результаты поиска

Содержание Rail System

Отзывы: