- 23 -
7. Using the program mode [3] simple setting (
for lock stitch trimming machine except Mitsubishi sewing machine
)
To set the function for DÜ RKOPP ADLER thread trimming sewing machine in simple setting
(For example, to set for the 271 class, "DÜ RKOPP ADLER") .......... Function setting [D271]
(1)
*Enter the program mode [3].
([
↓] + [A] + [D] keys)
(2)
*The mode will change to the program mode [3].
(3)
*Press the [
↓] key or [↑] key to change the function to
[D271].
(4)
*When the [D] key is held down, [D271] will flicker, and
the changes to the setting will be set.
(5)
*The mode will return to the normal mode when the [D]
key is held down over two seconds or more.
(This completes the settings.)
Description
A. Select the model name that corresponds to the sewing machine model for the simple setting values for the DÜRKOPP ADLER thread trimming
sewing machine on the "Technical manual". After selecting the function name, holds down the [D] key over 2 seconds or more. The function
name's set speed and function will be set automatically.
B. To return to the normal mode from the [D271] display, press the [
↑
] key while holding down [
↓
]. In this case, [D271] will not be set, and the last
settings will be used.
C. Each time the [
↓
] key is pressed in step 3, the function will change in order from [D697], [D271], [D273].....[750].
Caution
To use this mode, please ask your dealer or look at "TECHNICAL INFORMATION MANUAL"
about simple setting, I/O signal, Junction wiring in detail.
