Automatic air conditioning-Type2 (if so equipped)
Comfort controls
7-17
7
N00737301425
Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indicator light (A) will come on.
A sound will be made every time you push
the switch.
Push the switch again and the air condition-
ing compressor will stop and the indicator
light (A) goes off.
N00759800029
You can change the following functions to
match your preference.
Enable automatic air conditioning control:
When the mode selection dial or blower
speed selection dial has been set to the
“AUTO” position or when the tempera-
ture control dial has been set to the mini-
mum temperature, the air conditioning
switch is automatically controlled.
Disable automatic air conditioning con-
trol:
The air conditioning switch is not auto-
matically controlled, unless the air condi-
tioning switch is used.
Changing the settings
Press the air conditioning switch for about
10 seconds or longer.
When the setting has changed, the system
will beep and the indicator light will flash.
• When the setting has changed from
enabled to disabled,
the system will beep three times and the
indicator will flash three times.
• When the setting has changed from dis-
abled to enabled,
the system will beep two times and the
indicator light will flash three times.
NOTE
The factory setting is “Enable automatic air
control”.
While the mode selection dial is set to the
“
” position, the air selection will auto-
matically change to the outside air position,
even if the system is set to “Disable auto-
matic air control”, in order to prevent win-
dows from fogging up.
Air conditioning switch
NOTE
If a problem is detected in the air condition-
ing compressor, the air conditioning indica-
tor light (A) blinks. Press the air
conditioning switch once to turn it off, then
once more to turn it back on. If the air condi-
tioning indicator light does not blink there is
no problem. If it does blink, have it checked
at an authorized Mitsubishi Motors dealer or
a repair facility of your choice.
Sometimes, for example after using a high-
pressure car wash, the condenser can get wet,
and the air conditioning indicator light (A)
blinks temporarily. Wait for a while, press
the air conditioning switch once to turn the
system off, then once more to turn it back on.
Once the water evaporates, the blinking will
stop.
Personalizing the air conditioning
switch (Changing the function set-
ting)
NOTE
The factory setting is “Enable automatic air
conditioning control”.
BK0265500US.book 17 ページ 2018年5月8日 火曜日 午後8時7分
Содержание Outlander Sport 2019
