Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 119 / 361

Continuously variable transmission (CVT) (if so equipped)
5-54 Features and controls
5
N00560401118
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the position of the selector lever is indi-
cated in the multi-information display.
N00582900057
If the ambient temperature is low, the selector
lever position display on the multi-informa-
tion display may blink when the selector
lever is placed in the “D” (DRIVE), “Ds”
(DOWNSHIFT & SPORTY DRIVING), “L”
(LOW) or “R” (REVERSE) position immedi-
ately after the engine has been started. This
indicates that the transmission requires warm-
ing up. While the display is blinking, the
vehicle will not move, because the transmis-
sion keeps disengaging until the warm up is
completed even if the selector lever is placed
in the “D”, “Ds”, “L” or “R” position.
When the selector lever position display is
blinking, perform the following procedure:
1. Depress the brake pedal with your right
foot and place the selector lever in the
“N” (NEUTRAL) position for several
seconds.
2. Keep depressing the brake pedal and then
place the selector lever in the “D”
(DRIVE), “Ds” (DOWNSHIFT &
SPORTY DRIVING), “L” (LOW) or “R”
(REVERSE) position. If the selector lever
position display stops blinking, the warm
up is completed and the transmission will
function normally.
3. If the display is still blinking, repeat steps
1 and 2 above.
N00560501122
or
When the warning display or the warn-
ing display appears on the information screen
in the multi-information display while you
are driving, there could be a malfunction in
the CVT.
Selector lever position display
When the selector lever position
display blinks
WARNING
 To avoid unintended vehicle movement,
keep brake pedal applied with your right
foot and do not depress the accelerator
pedal, while the selector lever position dis-
play is blinking.
NOTE
 While the selector lever position display is
blinking, a buzzer will sound intermittently.
Warning display
CAUTION
 If a malfunction occurs in the CVT while
driving, the warning display or the
warning display will appear on the informa-
tion screen in the multi-information display.
In this case, follow these procedures:
[When warning display is showing]
The CVT fluid is overheating. The engine
control may activate to lower the CVT fluid
temperature, causing the engine revolutions
and vehicle speed to decrease, In this case,
take one of the following procedures.
• Slow down your vehicle.
BK0265500US.book 54 ページ ２０１８年５月８日 火曜日 午後８時７分