Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 179 / 361

Multi-information display
5-114 Features and controls
5
This displays the average speed from the last
reset to the present.
There are 2 types of mode settings as follows.
For details on how to change the average
speed display setting, refer to “Changing the
function settings (With ignition switch or
operation mode in ON)” on page 5-118.
 When the average speed is being dis-
played, if you hold down the multi-infor-
mation meter switch, these calculations
will be reset to zero.
 When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC” or “OFF” position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
 When the average speed is being dis-
played, if you hold down the multi-infor-
mation meter switch, these calculations
will be reset to zero.
 When the engine switch or the operation
mode is in the following conditions, the
average speed display will automatically
reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC” or “OFF” position for about
4 hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
The “Display language”, “Temperature unit”,
“Fuel consumption unit”, and “Average fuel
consumption and speed reset method” set-
tings can be modified as desired.
For further details, refer to “Changing the
function settings (With ignition switch or
operation mode in ON)” on page 5-118.
N00556301262
When there is information to be announced,
such as a system fault, a tone sounds and the
Average speed display
Manual reset mode
Auto reset mode
NOTE
 The average speed display and the average
fuel consumption display can be reset sepa-
rately in both auto reset mode and manual
reset mode.

“---” is displayed when the average speed
cannot be measured.
 The initial (default) setting is “Auto reset
mode”.
 The display setting can be changed to the
preferred units (mph or km/h).
Refer to “Changing the function settings
(With ignition switch or operation mode in
ON)” on page 5-118.

Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average speed dis-
play.
Function setting screen
Interrupt display screen (With
ignition switch or operation
mode in ON)
Warning display
NOTE
BK0265500US.book 114 ページ ２０１８年５月８日 火曜日 午後８時７分