Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 127 / 361

4-wheel drive operation
5-62 Features and controls
5
Set the drive mode-selector to “4WD AUTO”
or “4WD LOCK” in accordance with the road
conditions, and then gradually depress the
accelerator pedal for a smooth start.
Set the drive mode-selector to “4WD LOCK”
and then gradually depress the accelerator
pedal for a smooth start. Keep the pressure on
the accelerator pedal as constant as possible,
and drive at low speed.
Your vehicle may not provide sufficient hill
climbing ability and engine braking on steep
slope. Avoid driving on steep slopes even
though the vehicle is an 4-wheel drive vehi-
cle.
N00537800098
If the electrical circuits become wet, further
operation of the vehicle will be impossible;
therefore, avoid driving through water unless
On snowy or icy roads
NOTE
 The use of snow tires is recommended.
 Maintain a safe distance between vehicles,
avoid sudden braking, and use engine brak-
ing (downshifting).
CAUTION
 Avoid sudden braking, sudden acceleration
and sharp turning. Skidding occurs and con-
trol of the vehicle could be lost.
Driving on sandy or muddy
roads
CAUTION
 Do not force the vehicle or drive recklessly
on sandy surfaces. In comparison with nor-
mal road surfaces, the engine and other
drive-system components are put under
excessive strain when driving on such a sur-
face. This could lead to accidents.

If any of the following conditions occur
while the vehicle is being driven, immedi-
ately park your vehicle in a safe place and
follow these procedures:
• If the engine coolant temperature display
flashes on the information screen in the
multi-information display or the engine
power drops suddenly.
Refer to “Engine overheating” on page 8-4.
• If the “ ” warning display and “SLOW
DOWN” or the “ ” warning display and
“SERVICE REQUIRED” appear on the
information screen in the multi-information
display.
Refer to “Warning display” on page 5-54.
WARNING
 When attempting to rock your vehicle out
of a stuck position, be sure that the area
around the vehicle is clear of people and
physical objects. The rocking motion may
cause the vehicle to suddenly launch for-
ward/backward, causing injury or dam-
age to nearby people or objects.
NOTE
 Avoid sudden braking, sudden acceleration
and sharp turning; such operations could
result in the vehicle becoming stuck.

If the vehicle becomes stuck in sandy or
muddy roads, it can often be moved with a
rocking motion. Move the gearshift lever
alternately between the 1st and “R”
(Reverse) positions (M/T), the “D” (DRIVE)
and “R” (REVERSE) positions (CVT), while
pressing lightly on the accelerator pedal.
 Driving on rough road can cause rust on the
vehicle; wash the vehicle thoroughly as soon
as possible after such use.
Climbing/descending sharp
grades
Driving through water
BK0265500US.book 62 ページ ２０１８年５月８日 火曜日 午後８時７分