Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 138 / 361

Cruise control
Features and controls 5-73
5
N00546300031
N00518301684
Cruise control is an automatic speed control
system that keeps a set speed. It can be acti-
vated at speeds from about 25 mph
(40 km/h). Cruise control does not work at
speeds below about 25 mph (40 km/h).
CAUTION
 The system may be malfunctioning.
Park your vehicle in a safe place and stop the
engine.
Restart the engine and check whether the dis-
play/indicator goes out. If they go out, there
is no abnormal condition. If they do not go
out or appear frequently, it is not necessary
to stop the vehicle immediately, but you
should have your vehicle inspected by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice as soon as pos-
sible.
Towing
CAUTION
 When towing the vehicle with only the front
wheels or only the rear wheels raised off the
ground, do not place the ignition switch in
the “ON” position or do not put the operation
mode in ON. Placing the ignition switch in
the “ON” position or putting the operation
mode in ON could cause the ASC to operate,
resulting in an accident.
Note that the correct towing method depends
on the transmission type and the vehicle’s
drive configuration.
For details, refer to “Towing” on page 8-12.
Cruise control
CAUTION
 When you do not wish to drive at a set speed,
turn off the cruise control for safety.

Do not use cruise control when driving con-
ditions will not allow you to stay at the same
speed, such as in heavy traffic or on roads
that are winding, icy, snow-covered, wet,
slippery, on a steep downhill slope.
 On vehicles equipped with manual transaxle,
do not move the gearshift lever to the “N”
(Neutral) position while driving at a set
speed without depressing the clutch pedal.
The engine will run too fast and might be
damaged.
NOTE
 Cruise control may not be able to keep your
speed on uphills or downhills.
 Your speed may decrease on a steep uphill.
You may use the accelerator pedal if you
want to stay at your set speed.
 Your speed may increase to more than the set
speed on a steep downhill. You have to use
the brake to control your speed. As a result,
the set speed driving is deactivated.
Cruise control switches
A- CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise control.
B- SET - switch
Used to reduce the set speed and to set the
desired speed.
C- RES + switch
Used to increase the set speed and to
return to the original set speed.
D- CANCEL switch
Used to deactivate the set speed driving.
NOTE
BK0265500US.book 73 ページ ２０１８年５月８日 火曜日 午後８時７分