Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 221 / 361

Hazard warning flasher switch
5-156 Features and controls
5
indicator light in the instrument cluster will
flash three times.
N00522700275
If you press the flasher switch, the front and
rear turn signals will flash intermittently, and
so will the hazard warning lights. This is an
emergency warning system and should not be
used when the vehicle is in motion, except for
emergencies.
If you need to leave your vehicle, the flashers
will keep working after the ignition switch is
removed or the operation mode is put in OFF.
N00522800393
The front fog lights illuminate only when the
headlights are on low beam.
Turning the knob in the direction of the “ON”
position turns on the front fog lights as well
as the indicator in the instrument cluster. To
turn them off, turn the knob in the direction of
the “OFF” position.
The knob will return to the neutral position
when it is released.
NOTE
 A light in the instrument panel flashes to
show when the front and rear turn signal
lights are working properly.
If this light flashes faster than usual, check
for a burned out turn signal light bulb or mal-
functioning connection in the signal.
If the panel light does not come on when the
lever is moved, check for a blown fuse or a
burned out bulb in the panel.
Have the system inspected by your autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
 It is possible to modify functions as follows:
• Deactivate the turn signal light 3-flash
function for lane changes.
• Adjust the time required to operate the
lever for the 3-flash function.
See your authorized Mitsubishi Motors
dealer for details.
Hazard warning flasher
switch
NOTE NOTE
 If the flashers are used for several hours, the
battery will run down. This could make it
difficult or impossible to restart your vehicle.
Front fog light switch
(if so
equipped)
BK0265500US.book 156 ページ ２０１８年５月８日 火曜日 午後８時７分