Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 219 / 361

Combination headlights and dimmer switch
5-154 Features and controls
5
N00563201247
This function turns on the front side-marker
and parking lights for about 30 seconds after
the UNLOCK button (A) on the remote con-
trol transmitter is pressed when the combina-
tion headlights and dimmer switch is in the
“OFF” or “AUTO” position (for vehicles
equipped with the automatic light control).
On vehicles equipped with the automatic light
control, the welcome light function will oper-
ate only when it is dark outside the vehicle.
N00547301123
This function turns on the headlights in the
low beam setting for about 30 seconds after
the ignition switch is turned to the “OFF”
position or the operation mode is put in OFF.
1. Turn the combination headlights and dim-
mer switch to the “OFF” or “AUTO”
position (for vehicles equipped with the
automatic light control).
2. Turn the ignition switch to the “OFF”
position or put the operation mode in
OFF. Also, if a key was used to start the
engine, remove the key from the ignition
switch.
3. Within 60 seconds of turning the ignition
switch to the “OFF” position or putting
the operation mode in OFF, pull the turn
signal lever toward you.
Welcome light
NOTE
 While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
• Push the LOCK button (B) on the remote
control transmitter.
• Turn the combination headlights and dim-
mer switch to the “ ” or “ ” position.
• Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
 It is possible to modify functions as follows:
• The headlights can be set to come on in the
low beam setting.
• The welcome light function can be deacti-
vated.
For details, consult a Mitsubishi Motors
dealer.
Coming home light
NOTE
BK0265500US.book 154 ページ ２０１８年５月８日 火曜日 午後８時７分