Mitsubishi MOTORS Outlander Sport 2019, Руководство пользователя

Страница: 105 / 361

Parking brake
5-40 Features and controls
5
The sunshade can be opened and closed with
the ignition switch or the operation mode in
ON.
Press the switch (1), the sunshade opens.
Press and hold the switch (1), the sunshade
automatically opens. Release the switch once
the sunshade starts moving automatically.
To stop the moving sunshade, press the
switch (1), (2) or (3).
Press the switch (2), the sunshade closes.
Press and hold the switch (2), the sunshade
automatically closes. Release the switch once
the sunshade starts moving automatically.
To stop the moving sunshade, press the
switch (1), (2) or (3).
If a hand or head is trapped in the closing
sunshade opening, the safety mechanism will
cause the sunshade to re-open automatically.
The opened sunshade will become opera-
tional again after a few seconds.
N00511401497
To park the vehicle, first bring it to a com-
plete stop, fully engage the parking brake,
and then move the gearshift lever to 1st (on a
uphill) or “R” (Reverse) (on a downhill) posi-
tion for vehicles equipped with a manual
transaxle, set the selector lever to “P”
(PARK) position for vehicles equipped with a
continuously variable transmission (CVT).
 Operating the sunshade repeatedly with the
engine turned off will run down the battery.
Operate the sunshade only while the engine
is running.

Close the sunshade when parking the vehicle
for a long time. Parking in the hot sun with
the sunshade open will make the vehicle
inside extremely hot.
To open
NOTE
To close
Safety mechanism
NOTE
 The safety mechanism can be activated if the
driving conditions or other circumstances
cause the sunshade to be subjected to a phys-
ical shock similar to that caused by a trapped
hand or head.
CAUTION
 Do not deliberately trap your hands or head
in order to activate the safety mechanism.
Personal injury and malfunction of the sun-
shade could result.
Parking brake
BK0265500US.book 40 ページ ２０１８年５月８日 火曜日 午後８時７分