Mitsubishi Electric PFD-P250VM-E, Руководство по обслуживанию

Страница: 260 / 326

[8-12 Parts Replacement Instructions ]
BS_08_C chapter 8 -
61
8 Troub
le
sho
o
ting Bas
e
d on Ob
ser
ved
Sy
mp
toms
8-12-6 Maintenance Procedure for the Drain Pan
1. S-module
[Drain pan removal procedure]
(1) Remove the front panel from the unit by unscrewing the eight screws. (See Figure 1.)
(2) Cut the cable tie, unscrew the screw, and pull out the drain pan cover toward the right. (See Figure 3.)
(3) Remove the two rod holders holding the check joints in place, using a wrench. (See Figure 4.)
(4) Remove the drain pan by unscrewing the two screws. (See Figure 5.)
(5) Clean the drain pan and the drain pan cover. (See Figure 6.)
Remove dust and dirt from the drain groove.
Drain pan cover
Drain pan
cable tie
Screw
Pull out toward the right.
Check joint
Rod holders
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5 Figure 6
Front panel
Move the drain pan down by the
amount that the drain pan and the
fin guard are overlapped.
Pull the drain pan forward
and down.
0000004498.BOOK 61 ページ ２０１８年１月５日 金曜日 午前１０時３８分