manualshive.com logo in svg

Mitsubishi Electric MELSEC System Q, Специальное руководство по инструкциям

Mitsubishi Electric MELSEC System Q - Специальное руководство по инструкциям бесплатно доступно для загрузки с manualshive.com. Получите подробное руководство по эксплуатации и настройке этого продукта, чтобы максимизировать его потенциал и эффективность работы. Скачивайте сейчас и быстро освоитесь с функционалом.

Поделиться
Скачать
background image

311

WARRANTY

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product
within the gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service
Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be solely at
the customer's discretion.  Mitsubishi shall not be held responsible for any re-commissioning, maintenance, or testing
on-site that involves replacement of the failed module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, and
the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of repair
parts shall not exceed the gratis warranty term before repairs.
[Gratis Warranty Range]

(1) The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., which

follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution labels on the
product.

(2) Even within the gratis warranty term, repairs shall be charged for in the following cases.

1. Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure caused

by the user's hardware or software design.

2. Failure caused by unapproved modifications, etc., to the product by the user.
3. When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if functions

or structures, judged as necessary in the legal safety measures the user's device is subject to or as necessary by
industry standards, had been provided.

4. Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the

instruction manual had been correctly serviced or replaced.

5. Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force

majeure such as earthquakes, lightning, wind and water damage.

6. Failure caused by reasons unpredictable by scientific technology standards at time of shipment from Mitsubishi.
7. Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.

2. Onerous repair term after discontinuation of production

(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is discontinued.

Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.

(2) Product supply (including repair parts) is not available after production is discontinued.

3. Overseas service

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at each FA
Center may differ.

4. Exclusion of loss in opportunity and secondary loss from warranty liability

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:

(1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
(2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3) Special damages and secondary damages whether foreseeable or not, compensation for accidents, and

compensation for damages to products other than Mitsubishi products.

(4) Replacement by the user, maintenance of on-site equipment, start-up test run and other tasks.

5. Changes in product specifications

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice.

Содержание MELSEC System Q





























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC System Q

FAAC E550 Manual preview
E550
Бренд: FAAC Страницы: 12
CAME TWIN Maintenance Instructions Manual preview
TWIN
Бренд: CAME Страницы: 98
CAME ZL19N Installation Manual preview
ZL19N
Бренд: CAME Страницы: 16
CAME RIOED8WS Instructions Manual preview
RIOED8WS
Бренд: CAME Страницы: 8
Daikin BRC1H71W Installation Manual preview
BRC1H71W
Бренд: Daikin Страницы: 38
Daikin BRC1H71W Operation Handbook preview
BRC1H71W
Бренд: Daikin Страницы: 2
Daikin BRC1E72 Operation Manual preview
BRC1E72
Бренд: Daikin Страницы: 148
Daikin EHVH04S18CA Operation Manual preview
EHVH04S18CA
Бренд: Daikin Страницы: 12
Daktronics RC-100 Operation Manual preview
RC-100
Бренд: Daktronics Страницы: 52
Waeco RC-100 Installation And Operating Instructions Manual preview
RC-100
Бренд: Waeco Страницы: 20
Z-Wave RC-100 Operating Instructions Manual preview
RC-100
Бренд: Z-Wave Страницы: 56
Paradox REM3 Instructions preview
REM3
Бренд: Paradox Страницы: 2
Paradox MG-RCV3 Reference & Installation Manual preview
MG-RCV3
Бренд: Paradox Страницы: 44
Patron Buggy User Instructions preview
Buggy
Бренд: Patron Страницы: 17
Data Signs PTL Compact 2 Operation And Maintenance Manual preview
PTL Compact 2
Бренд: Data Signs Страницы: 23
Watts KONTACT Manual preview
KONTACT
Бренд: Watts Страницы: 17
Dantel 44093 Installation & Operation Manual preview
44093
Бренд: Dantel Страницы: 6
JCM GAMMA VERSUS Series Manual preview
GAMMA VERSUS Series
Бренд: JCM Страницы: 111

Бренды по названию

Популярные бренды

Загрузить еще бренды