Mitsubishi Electric FR-A820-00046 (0.4K), Инструкция по эксплуатации

Страница: 580 / 1218

(M) Monitor display and monitor output signal Parameters
5 - 378
5.11.6 Output terminal function selection
Use the following parameters to change the functions of the open collector output terminals, relay
output terminals, or virtual terminals of CC-Link IE Field Network Basic (for FR-A800-E).
The initial value is for standard models and IP55 compatible models.
The initial value is for separated converter types.
The setting is available only for the FR-A800-GF, or the FR-A800-E, or when a compatible plug-in
option is mounted.
The setting is available for FR-A800-E only.
$
The parameter is used when the CC-Link IE Field Network Basic is selected (for FR-A800-E).
(Refer to page 5-802.)
Parameters referred to
Pr. 3 Base frequency => page 5-690
Pr. 52 Operation panel main monitor selection => page 5-344
Pr. 54 FM/CA terminal function selection => page 5-358
Pr. 158 AM terminal function selection => page 5-358
Pr. Name
Initial
value
Initial set signal Setting range
190
M400
RUN terminal function
selection
Open
collec-
tor
output
terminal
0 RUN (Inverter running)
0 to 8, 10 to 20, 22, 25 to 28, 30 to
36, 38 to 57, 60, 61, 63, 64, 67, 68,
70, 79, 80, 84, 85, 90 to 99, 100 to
108, 110 to 116, 120, 122, 125 to
128, 130 to 136, 138 to 157, 160,
161, 163, 164, 167, 168, 170, 179,
180, 184, 185, 190 to 199, 200 to
208, 242
, 300 to 308, 342 , 9999
191
M401
SU terminal function
selection
1 SU (Up to frequency)
192
M402
IPF terminal function
selection
2
IPF (Instantaneous
power failure/
undervoltage)
9999
193
M403
OL terminal function
selection
3 OL (Overload warning)
194
M404
FU terminal function
selection
4
FU (Output frequency
detection)
195
M405
ABC1 terminal function
selection
Relay
output
terminal
99 ALM (Fault)
0 to 8, 10 to 20, 22, 25 to 28, 30 to
36, 38 to 57, 60, 61, 63, 64, 67, 68,
70, 79, 80, 84, 85, 90, 91, 94 to 99,
100 to 108, 110 to 116, 120, 122,
125 to 128, 130 to 136, 138157,
160, 161, 163, 164, 167, 168, 170,
179, 180, 184, 185, 190, 191, 194 to
199, 200 to 208, 242
, 300 to 308,
342 , 9999
196
M406
ABC2 terminal function
selection
9999 No function
313
$
M410
DO0 output selection
Option
terminal
9999
No function
0 to 8, 10 to 20, 22, 25 to 28,
30 to 36, 38 to 57, 60, 61, 63, 64, 68,
70, 79, 84 to 99, 100 to 108, 110 to
116, 120, 122, 125 to 128, 130 to
136, 138 to 157, 160, 161, 163, 164,
168, 170, 179,
184 to 199, 200 to 208, 242 ,
300 to 308, 342 , 9999
314
$
M411
DO1 output selection 9999
315
$
M412
DO2 output selection 9999
Pr. Name
Initial
value
Setting range Description
289
M431
Inverter output terminal
filter
9999
5 to 50 ms
Set the time delay for the output terminal
response.
9999 No output terminal filter.