Mitsubishi Electric FR-A820-00046 (0.4K), Инструкция по эксплуатации

Страница: 546 / 1218

(M) Monitor display and monitor output signal Parameters
5 - 344
5.11.2 Monitor indicator selection using operation panel or via communication
The monitored item to be displayed on the operation panel or the parameter unit can be selected.
Pr. Name Initial value Setting range Description
52
M100
Operation panel main monitor
selection
0
(output
frequency)
0, 5 to 14, 17 to 20,
22 to 36, 38, 40 to
46, 50 to 57, 61, 62,
64, 67, 71 to 74, 87
to 98, 100
Select the monitor to be displayed
on the operation panel and
parameter unit.
Refer to page 5-345 for the monitor
description.
774
M101
Operation panel monitor
selection 1
9999
1 to 3, 5 to 14,
17 to 20, 22 to 36,
38, 40 to 46, 50 to
57, 61, 62, 64, 67, 71
to 74, 87 to 98, 100,
9999
The output frequency, output
current and output voltage monitor
that are displayed in monitor mode
on the operation panel and
parameter unit can be switched to a
specified monitor.
9999: Follows the Pr. 52 setting.
775
M102
Operation panel monitor
selection 2
776
M103
Operation panel monitor
selection 3
992
M104
Operation panel setting dial
push monitor selection
0
(Set
frequency)
0 to 3, 5 to 14,
17 to 20, 22 to 36,
38, 40 to 46, 50 to
57, 61, 62, 64, 67, 71
to 74, 87 to 98, 100
Select the monitor to be displayed
when the setting dial on the
operation panel is pushed.
170
M020
Watt-hour meter clear 9999
0
Set "0" to clear the watt-hour meter
monitor.
10
Set the maximum value for
monitoring via communication. Set it
in the range of 0 and 9999 kWh.
9999
Set the maximum value for
monitoring via communication. Set it
in the range of 0 and 65535 kWh.
563
M021
Energization time carrying-
over times
0
(0 to 65535)
(Read-only)
Displays the numbers of times that
the cumulative energization time
monitor exceeded 65535 h. Read-
only.
268
M022
Monitor decimal digits
selection
9999
0 Displays as integral value.
1 Displays in 0.1 increments.
9999 No function
891
M023
Cumulative power monitor
digit shifted times
9999
0 to 4
Set the number of times to shift the
cumulative power monitor digit.
The monitor value is clamped at the
maximum value.
9999
No shift
Monitor value is cleared when it
exceeds the maximum value.
171
M030
Operation hour meter clear 9999
0
Set "0" to clear the operation hour
monitor.
9999
The read value is always 9999.
Nothing happens when "9999" is set.
564
M031
Operating time carrying-over
times
0
(0 to 65535)
(Read-only)
Displays the numbers of times that
the operating time monitor
exceeded 65535 h. Read-only.
290
M044
Monitor negative output
selection
0 0 to 7
Set the availability of output with a
minus sign for the terminal AM, the
operation panel display, or
monitoring via communication.
(Refer to page 5-355.)
1018
M045
Monitor with sign selection 9999
0
Select items to be displayed with
minus signs.
9999
1106
M050
Torque monitor filter 9999
0 to 5 s
The filter time constant is selectable
for monitoring of the torque. A larger
setting results in slower response.
9999 0.3 s filter
1107
M051
Running speed monitor filter 9999
0 to 5 s
The filter time constant is selectable
for monitoring of the running speed.
A larger setting results in slower
response.
9999 0.08 s filter