Mitsubishi Electric FR-A820-00046 (0.4K), Инструкция по эксплуатации

Страница: 776 / 1218

(A) Application parameters Parameters
5 - 574
Connection diagram
The main speed command differs according to each operation mode (External, PU, communication).
The output signal terminal to be used differs according to the Pr. 190 to Pr. 196 (Output terminal
function selection) setting.
The input signal terminal to be used differs according to the Pr. 178 to Pr. 189 (Input terminal
function selection) setting.
The AU signal need not be input.
Dancer control operation selection (Pr. 128)
When Pr. 133
≠
"9999", the Pr. 133 setting is valid.
I002708E_G
Fig. 5-281: Example in source logic
Pr. 128
setting
PID action
Additive
method
Set point input Measured value input
0 PID invalid
⎯ ⎯ ⎯
40 Reverse action
Fixed
Set by Pr. 133 or Input by terminal
selected by Pr. 609
Input by terminal selected by Pr. 610
41
Forward
action
42 Reverse action
Ratio
43
Forward
action
Others Refer to page 5-543.
Tab. 5-241: PID control in dependence of parameter 128
MCCB
R/L1
S/L2
T/L3
STF
STR
RH(X14)
PC
10
2
5
4
U
V
W
(FUP)FU
SE
(FDN)OL
Source logic
Pr. 128 = 41
Pr. 182 = 14
Pr. 193 = 14
Pr. 194 = 15
Pr. 133 = set point
Power supply
Output signal common
Forward rotation
Reverse rotation
PID control selection
Main speed command
setting potentiometer
Feedback value of
dancer roll position
Inverter
Motor
IM
Upper limit
Lower limit