Mitsubishi Electric FR-A820-00046 (0.4K), Инструкция по эксплуатации

Страница: 1021 / 1218

Parameters Ethernet communication (FR-A800-E)
FR-A800 5 - 819
Torque command / torque limit using the CC-Link IE Field Network Basic
Torque commands can be given or the torque can be limited via CC-Link IE Field Network Basic under
Real sensorless vector control, vector control, or PM sensorless vector control. The value is used to lim-
it the torque during speed control or position control, and to give a torque command during torque
control. To limit the torque, set Pr. 810 "Torque limit input method selection" = "2". The torque com-
mand / torque limit setting method can be selected using Pr. 804 "Torque command source selec-
tion". (Torque control cannot be performed with a PM motor.)
Can also be set from operation panel or parameter unit.
When a negative value is set as the torque limit, the torque is limited by the absolute value.
Pr. Name
Initial
value
Setting
range
Description
804
D400
Torque command source
selection
0
0 Torque command based on the analog input to the terminal 1
1
Torque command / torque limit using the CC-Link IE Field
Network Basic
앫
Torque command (-400% to 400%) by the parameter setting
(Pr. 805 or Pr. 806)
2 Torque command by the pulse train input (FR-A8AL)
3
Torque command / torque limit using the CC-Link IE Field
Network Basic
앫
Torque command / torque limit (-400% to 400%) by the
parameter setting (Pr. 805 or Pr. 806)
앫
Setting is available using the remote register RWw1 or RWwC.
(-400% to 400%)
4 Torque command by 16-bit digital input (FR-A8AX)
5
Torque command / torque limit using the CC-Link IE Field
Network Basic
앫
Torque command / torque limit (-327.68% to 327.67%) by the
parameter setting (Pr. 805 or Pr. 806)
앫
Setting is available using the remote register RWw1 or RWwC.
(-327.68% to 327.67%)
6
Torque command / torque limit using the CC-Link IE Field
Network Basic
앫
Torque command / torque limit (-327.68% to 327.67%) by the
parameter setting (Pr. 805 or Pr. 806)
810
H700
Torque limit input
method selection
0
0
Internal torque limit 1
(Torque limited by parameter settings.)
1
External torque limit
(Torque limited by terminals 1 and 4.)
2
Internal torque limit 2
(Torque limited using the CC-Link IE Field Network Basic)