manualshive.com logo in svg

Mitsubishi Electric City Multi PURY-EM200YNW-A1, Руководство по обслуживанию

Климатический кондиционер Mitsubishi Electric City Multi PURY-EM200YNW-A1 - это эффективное решение для охлаждения и обогрева помещений. Для подробной информации о сервисе и обслуживании, скачайте бесплатное руководство по эксплуатации на manualshive.com. Устройство легкое в управлении благодаря доступному руководству.

Поделиться
Скачать
background image

[9-4 Maintenance LED Display and Troubleshooting ]

BS_09_F

chapter 9 - 

15

9  USB Func

tion

3.  Rewriting software (outdoor unit/HBC)
(1) Maintenance LED does not display "Pro."

(Meaning or Cause)

The system is not started in Software Rewrite Mode.

Switches (outdoor unit: SW7-9; HBC: SW002-9) on the control board may not be in the ON position, or the portable charger 

may not be charged sufficiently.

Power-supply units (outdoor units/power-supply expansion unit) may not be turned off.

Applicable only when rewriting the S/W of the HBC.

(Solution)

Make sure switches are ON using Section [9-3-2 Rewriting Software] as a reference.

Restart using a fully charged portable charger or a different charger.

Check that the power-supply units (outdoor units/power-supply expansion unit) are turned off.

(2) Pressing the switch (SWP3) for starting the rewriting process does not start the process, and 

Maintenance LED continues to display "Pro."

(Meaning or Cause)
There may be a problem with the USB memory stick.
(Solution)
Check the connection of the USB memory stick.

If no problem is found, the USB memory stick may be at fault.

Check if the USB memory stick meets the specification described in Section [9-1-3 Necessary Materials](1) USB memory 

stick.

If compliance is confirmed, the USB memory stick may be broken. Replace it with a new one.

(3) At the time of the system start after "END" was displayed, Maintenance LED displays "Pro."

(Meaning or Cause)
The system was started in Software Rewrite Mode.

Switches (outdoor unit: SW7-9; HBC: SW002-9) on the control board may not be in the OFF position.

If the switches are in the OFF position, it means the software rewrite process has failed.
(Solution)
After turning off control board switches, turn on the system again.

If the switches are in the OFF position, it means the software rewrite process has failed.

Try rewriting the software again by following the procedure detailed in Section [9-3-2 Rewriting Software]. If the problem per-

sists, rewrite the software, using a ROM writer.

(4) Maintenance LED displays "Er01."

(Meaning or Cause)

Because an error occurred in the USB memory stick before the start of software rewrite, software rewrite has not been com-

pleted.

Error Er01 occurs when SWP3 on the control board is pressed to rewrite the software immediately after power is supplied to 

the USB-connected control board.

(When the software rewriting is started before the control board recognizes the USB memory stick.)
(Solution)
Check the connection of the USB memory stick.

If no problem is found, the USB memory stick may be at fault.

Check the following five items.

After supplying power to the USB-connected control board, wait at least five seconds before pressing SWP3 on the control 

board to rewrite software because it takes approximately five seconds for the control board to recognize the USB memory 

stick.

Compliance of the USB memory stick to the specification of Section [9-1-3 Necessary Materials](1) USB memory stick.

The countermeasure program file "******.mot” for the intended model is used.

The countermeasure program is not for a different model or version.

The countermeasure program file "******.mot” is stored in the root folder. It is not stored in another folder.

Make sure that the program file "******.mot” is stored in the root folder of the USB memory and not in any folder created on 

the USB memory stick.

When there is no problem in the five items above, the USB memory stick may be broken. Replace it with a new one. After the 

check is completed, follow the procedure starting with the step explained in under [9-3-2 Rewriting Software].

0000006418.BOOK  15 ページ  ２０２１年１０月１３日　水曜日　午前１０時３８分

Содержание City Multi PURY-EM200YNW-A1
























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для City Multi PURY-EM200YNW-A1

York MLCA-MLHA-07-24 manua Installation & Owner'S Manual preview
MLCA-MLHA-07-24 manua
Бренд: York Страницы: 22
York VITALITY series User Manual preview
VITALITY series
Бренд: York Страницы: 14
RollSeal RS-500 Series Installation Manual preview
RS-500 Series
Бренд: RollSeal Страницы: 68
Daikin FDM75DXV1 Installation Manual preview
FDM75DXV1
Бренд: Daikin Страницы: 28
MANN+HUMMEL FreciousCare FCI 5000 Operating Manual preview
FreciousCare FCI 5000
Бренд: MANN+HUMMEL Страницы: 11
Parker SMOG-HOG PSG Owner'S Manual preview
SMOG-HOG PSG
Бренд: Parker Страницы: 36
Aircommand sandpiper Owner'S Manual preview
sandpiper
Бренд: Aircommand Страницы: 22
Midea M thermal A Mono Series Service Manual preview
M thermal A Mono Series
Бренд: Midea Страницы: 93
SPT WA-1511S User Manual preview
WA-1511S
Бренд: SPT Страницы: 24
CAA HIA045C3AA Installation, Start-Up And Service Manual preview
HIA045C3AA
Бренд: CAA Страницы: 42
arcelik 09565 User Manual preview
09565
Бренд: arcelik Страницы: 33
Easy@Home EPA080BAUW User Manual preview
EPA080BAUW
Бренд: Easy@Home Страницы: 56
Lennox XC13 018 Unit Information preview
XC13 018
Бренд: Lennox Страницы: 14
Codume X-Vent II 300 Operating Manual preview
X-Vent II 300
Бренд: Codume Страницы: 28
Daikin FTXG25CVMAS Operation Manual preview
FTXG25CVMAS
Бренд: Daikin Страницы: 30
Eldom Puri PO200 Instruction Manual preview
Puri PO200
Бренд: Eldom Страницы: 44
Daikin FTX09WMVJU9 Operation Manual preview
FTX09WMVJU9
Бренд: Daikin Страницы: 34
Daikin RZQG71L8V1B Installation Manual preview
RZQG71L8V1B
Бренд: Daikin Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды