Mita PointSource Ai 3010, Руководство по обслуживанию

Страница: 313 / 478

2AR
3-3-40
( 9 ) Adjusting the leading edge registration for scanning an original on the
contact glass
Perform the following adjustment if there is a regular error between the leading edges of
the copy image and the original.
U053
(P.3-3-18)
U066
U403
(P.3-3-42)
U407
(P.3-3-19)
U 402
(P.3-3-21)
Caution: Before performing the following adjustment, ensure that the above
adjustments have been made in maintenance mode.
<Procedure>
Is the
leading edge
registration correct?
Yes
No
Start
Enter maintenance mode.
Enter “066” using the numeric keys.
Press the start key.
Press the interrupt key.
Place an original and press
the start key to make a test copy.
For copy example 1, increase the
value by using the cursor left key.
For copy example 2, decrease the
value by using the cursor right key.
Press the start key.
The new setting
is stored.
Press the stop/clear key.
Exit maintenance mode.
Setting range: –32 - +32
Changing the value
by 1 moves the leading edge
by 0.17 mm.
Initial setting: 0
End
Original Copy
example 1
Figure 3-3-44
Copy
example 2
2AR-1