3-2-80-12
2AR-1
Mainte-
nance
Description
item No.
U607
(cont.)
Setting no-ring reception when using the F network
Sets whether to enable no-ring reception (a fax is received without the
machine ringing) when using F network. Note that since the F network is
only available in Japan, no setting is necessary for other destinations.
1. Enter 1 or 2 using the numeric keys to change the setting.
No-ring reception is enabled.
No-ring reception is disabled.
Display
1: ON
2: OFF
Description
Initial setting: 2
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the mode for remote switching
Sets the signal detection method for remote switching. Be sure to change
the setting according to the type of telephone connected to the machine.
1. Enter 1 or 2 using the numeric keys to change the setting.
One-shot detection
Continuous detection
Display
1: ONE
2: CONT
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the transmission intervals
Sets the minimum time required for connection to the line for the next
transmission after the previous transmission was completed. Change the
setting if transmission problems occur during multi-transmission, such as
broadcasting and polling transmission, or reserved transmission.
1. Change the setting using the numeric keys.
10 s
30 s
70 s
120 s
Display
1: 10
2: 30
3: 70
4: 120
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for
selecting a maintenance item No. is displayed.
Содержание PointSource Ai 3010
