Mita PointSource Ai 3010, Руководство по обслуживанию

Страница: 171 / 478

3-2-42
2AR
Mainte-
nance Description
item No.
Method to set or check the original size detection threshold
1. Place an original on the contact glass and turn the original detection
switch on. The original size detection starts and detection data is
displayed.
* See Paper size in U073 for the paper size for each setting.
Display Description
Data
range
Remarks
LEVEL
WAIT TIME
ORIGINAL AREA
SIZE
B_DATA
W_DATA
Scanner data threshold
Time between original detection
switch turning on and reading-in
of scanner data
Detected original width
Original size detected by scanner
data and original size sensor
detection data
Black (no original) data at the
point on the boundary between
original area and no original area
White (original present) data at
the point on the boundary
between original area and no
original area
0 to 255
0 to 100 ms
0 to 350 mm
0 to 63*
0 to 255
0 to 255
Adjustable
Adjustable
2. To change the original size detection threshold, select LEVEL or
WAIT TIME using the cursor up/down keys and change the setting
using the cursor left/right keys.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for
selecting a maintenance item No. is displayed.
U099
(cont.)