Mircom FR-320 Series Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 112

background image

109

Warranty and Warning Information

be due.

Conditions to Void Warranty

This warranty applies only to defects in parts and workmanship relating to normal use. It does
not cover:

•

damage incurred in shipping or handling;

•

damage caused by disaster such as fire, flood, wind, earthquake or lightning;

•

damage due to causes beyond the control of MGC such as excessive voltage,
mechanical shock or water damage;

•

damage caused by unauthorized attachment, alterations, modifications or foreign
objects;

•

damage caused by peripherals (unless such peripherals were supplied by MGC);

•

defects caused by failure to provide a suitable installation environment for the products;

•

damage caused by use of the products for purposes other than those for which it was
designed;

•

damage from improper maintenance;

•

damage arising out of any other abuse, mishandling or improper application of the
products.

Warranty Procedure

To obtain service under this warranty, please return the item(s) in question to the point of
purchase. All authorized distributors and dealers have a warranty program. Anyone returning
goods to MGC must first obtain an authorization number. MGC will not accept any shipment
whatsoever for which prior authorization has not been obtained. NOTE: Unless specific pre-
authorization in writing is obtained from MGC management, no credits will be issued for
custom fabricated products or parts or for complete fire alarm system. MGC will at its sole
option, repair or replace parts under warranty. Advance replacements for such items must be
purchased.

Note: MGC’s liability for failure to repair the product under this warranty after a reasonable
number of attempts will be limited to a replacement of the product, as the exclusive remedy for
breach of warranty.

Disclaimer of Warranties

This warranty contains the entire warranty and shall be in lieu of any and all other warranties,
whether expressed or implied (including all implied warranties of merchantability or fitness for
a particular purpose) and of all other obligations or liabilities. MGC neither assumes nor
authorizes any other person purporting to act on its behalf to modify or to change this
warranty, or to assume for it any other warranty or liability concerning this product.

This disclaimer of warranties and limited warranty are governed by the laws of the province of
Ontario, Canada.

Out of Warranty Repairs

MGC will at its option repair or replace out-of-warranty products which are returned to its
factory according to the following conditions. Anyone returning goods to MGC must first obtain
an authorization number. MGC will not accept any shipment whatsoever for which prior
authorization has not been obtained.

Products which MGC determines to be repairable will be repaired and returned. A set fee

«
...
107
108
109
110
111
...
»

Содержание FR-320 Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для FR-320 Series

Бренд: Hamworthy Страницы: 10

Бренд: Hansen Страницы: 4

Бренд: 2gig Technologies Страницы: 4

Бренд: 2gig Technologies Страницы: 2

Бренд: G1SLE Страницы: 2

Бренд: Febco Страницы: 12

Бренд: HANYOUNG NUX Страницы: 36

Бренд: HANYOUNG NUX Страницы: 4

Бренд: MADRIX Страницы: 91

Бренд: MADRIX Страницы: 36

Бренд: MADRIX Страницы: 40

Бренд: YASKAWA Страницы: 18

BT300 BurnerTronic

Бренд: Lamtec Страницы: 48

Бренд: Magellan Страницы: 2

Бренд: Waterway Страницы: 8

Бренд: Maximum Controls Страницы: 58

Бренд: Velux Страницы: 11

Бренд: Kantronics Страницы: 201

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды